How to Frame Garage Door Opening?


New member
Mar 28, 2023
How to Frame Garage Door Opening?
It is essential to recognize the distinction between the tough opening and the completed opening. In the storage door set up business, we refer to the “rough opening” or the “rough framing” as the dimension of the opening earlier than the completed framing is applied. The tough opening ought to be barely large than the dimension of your storage door, to go away room for the frame.

The completed opening is the closing poor house after you have established the framing. This completed opening must be the identical measurement as your new storage door, or barely smaller. For example, if the door is 16-by-7 feet, then the carried out storage door opening have to additionally be 16-by-7 feet.

Standard and roll-up storage doorways work in a different way than different sorts of residential doors. While storage doorways shut up towards the difficult opening, doorways such as closets and the front doorways healthy internal their completed openings.

The Importance of Framing a Garage Door Opening
Framing out a storage door carport is a easy task. The purpose is to maintain all the measurements in mind. So you have to recognize the dimension of the storage door beforehand. The body development affords a best in shape for the storage door. If you don’t body the tough opening, the storage door won’t in shape in properly. You will cease up spending way greater cash on repairs need to this happen. If you are a DIY fan, studying how to body a storage door opening ought to be interesting. Simply comply with each element to get the quality results.

Also Read: Eave Vs Soffit

What are Rough and Finished Openings?
Two phrases that householders will hear referred to when buying for a new storage door are hard and completed openings. Rough openings are the open house at a garage’s the front that is barely large than the storage door. This is achieved to furnish sufficient room for the door to be opened and include its parts. Finished openings, conversely, are the final bad areas after you have hooked up the framing. The photo under indicates a completed opening example.

Calculate the Rough Opening
What is a difficult opening? This is the size earlier than the lumber and the storage door installed. Thus, you should have wider and greater tough opening than the storage door itself. The thumbs up rule for difficult opening is including one and half of inches to the storage door size. For a 15 inches extensive storage door, you want 18 inches large opening. The identical rule applies to the door top as well.

For example, the top of the door is six foot. You want to create a six foot and one-half inches measured from the floor. Since the greater size is no longer too wide, you want to double take a look at it. One choice is dry becoming the storage door to the difficult opening. If the door nonetheless suits perfectly, then you want to add every other one and 1/2 inches to the measurement.

Also Read: How Much to Pave a Driveway

Measure the Rough Opening for the Garage Door
Make positive your tough opening is large than your storage door earlier than you do the framing. Ensure that you go away one and a 1/2 inches between as a house from the storage ground and the hard header. A seven-foot-tall storage door, for instance, must have a header positioned eight and a 1/2 inches above the completed floor.

There have to be 9 inches of house between the header and the door width-wise. Taking the size between the edges of the hard opening and the door, it ought to be three inches longer than the door. So, for example, with regard to a 12-foot broad storage door, you would create the hard opening to be 15 inches wide.

Additional Framing Tips For Garage Doors
For applicable storage door framing, comply with these speedy tips:

  • Install the head and facet jambs after the wall is in place.
  • The facet jambs ought to be a quarter inch above the real concrete flooring in order to forestall moisture from wicking and rotting.
  • Consider decreasing the header size and peak if you are the use of 1 inch cloth such as 1 with the aid of two inch or 1 with the aid of three inch etc. boards.
  • Treated lumber need to by no means be used for door jambs, as it corrodes metal and eats holes in aluminum.
Also Read: Stucco Texture Types


New member
Mar 31, 2023
Ready to make the switch to a new automatic garage door? With more than 50 years of experience and a commitment to our customers, We are your neighborhood garage door installer. Click here for a free estimate on Affordable Garage Door Installation in Lakewood NJ that will increase the appeal and value of your house.